Construction Of A Simple Paint Mixer

UZOIGWE EMMANUEL 40 PAGES (20000 WORDS) Seminar 0 Views
ABSTRACT

A

paint mixer is defined as a pattern constructed for the production

(mixing) of paint manually.  The method of fabrication of the paint

mixer involved a preliminary computation of the dimensions of the

standard mixer in relation to the dimension of the reacting vessel in

which they will be used in marking out, cutting out to sizes, rolling,

folding, welding, body-filling and painting.  The first step taken in

the fabrication of this project work was the selection of material

suitable for the construction.  The materials used in the construction

were locally sourced and were selected to suit the fabrication.  The

mild steel sheet was used instead of galvanized steel because of its

malleability and low cost.  The dimensions of the mixer are as follows:








- Thickness of the mild steel sheet= 2mm.
- The actual diameter of cylinder = 1ft or 12 inches.
- Volume of the cylinder = 37.7 inches.
- The overlapping volume = 2 inches.
- Depth/Height of mixer = 18 inches.
To fabricate the mixer, the design of the mixer is divided into:-
(1) The cylinder (mixing vessel).
(2) The driving shaft and impeller.
(3) The drive.
The

paint mixer assembling was done by installing the bearing in the

bearing housing and installing the drive shaft in the bearing whose

extreme has been mounted with an impeller.  The above assembling was

then installed in the mixing cylinder with the help of bolts and nuts.

 The drive was then installed on the extreme of the drive shaft with the

help of keys. The cover was placed on top of the cylinder and fastened

with anchorage.  The paint mixer was tested and confirmed to function

effectively which can serve the purpose of a manual paint mixing.
- See more at: https://afribary.com/read/5155/construction-of-a-simple-paint-mixer-4412#sthash.ZhTPtmBk.dpuf
ABSTRACT

A

paint mixer is defined as a pattern constructed for the production

(mixing) of paint manually.  The method of fabrication of the paint

mixer involved a preliminary computation of the dimensions of the

standard mixer in relation to the dimension of the reacting vessel in

which they will be used in marking out, cutting out to sizes, rolling,

folding, welding, body-filling and painting.  The first step taken in

the fabrication of this project work was the selection of material

suitable for the construction.  The materials used in the construction

were locally sourced and were selected to suit the fabrication.  The

mild steel sheet was used instead of galvanized steel because of its

malleability and low cost.  The dimensions of the mixer are as follows:








- Thickness of the mild steel sheet= 2mm.
- The actual diameter of cylinder = 1ft or 12 inches.
- Volume of the cylinder = 37.7 inches.
- The overlapping volume = 2 inches.
- Depth/Height of mixer = 18 inches.
To fabricate the mixer, the design of the mixer is divided into:-
(1) The cylinder (mixing vessel).
(2) The driving shaft and impeller.
(3) The drive.
The

paint mixer assembling was done by installing the bearing in the

bearing housing and installing the drive shaft in the bearing whose

extreme has been mounted with an impeller.  The above assembling was

then installed in the mixing cylinder with the help of bolts and nuts.

 The drive was then installed on the extreme of the drive shaft with the

help of keys. The cover was placed on top of the cylinder and fastened

with anchorage.  The paint mixer was tested and confirmed to function

effectively which can serve the purpose of a manual paint mixing.
- See more at: https://afribary.com/read/5155/construction-of-a-simple-paint-mixer-4412#sthash.ZhTPtmBk.dpuf
ABSTRACT

A

paint mixer is defined as a pattern constructed for the production

(mixing) of paint manually.  The method of fabrication of the paint

mixer involved a preliminary computation of the dimensions of the

standard mixer in relation to the dimension of the reacting vessel in

which they will be used in marking out, cutting out to sizes, rolling,

folding, welding, body-filling and painting.  The first step taken in

the fabrication of this project work was the selection of material

suitable for the construction.  The materials used in the construction

were locally sourced and were selected to suit the fabrication.  The

mild steel sheet was used instead of galvanized steel because of its

malleability and low cost.  The dimensions of the mixer are as follows:








- Thickness of the mild steel sheet= 2mm.
- The actual diameter of cylinder = 1ft or 12 inches.
- Volume of the cylinder = 37.7 inches.
- The overlapping volume = 2 inches.
- Depth/Height of mixer = 18 inches.
To fabricate the mixer, the design of the mixer is divided into:-
(1) The cylinder (mixing vessel).
(2) The driving shaft and impeller.
(3) The drive.
The

paint mixer assembling was done by installing the bearing in the

bearing housing and installing the drive shaft in the bearing whose

extreme has been mounted with an impeller.  The above assembling was

then installed in the mixing cylinder with the help of bolts and nuts.

 The drive was then installed on the extreme of the drive shaft with the

help of keys. The cover was placed on top of the cylinder and fastened

with anchorage.  The paint mixer was tested and confirmed to function

effectively which can serve the purpose of a manual paint mixing.
- See more at: https://afribary.com/read/5155/construction-of-a-simple-paint-mixer-4412#sthash.ZhTPtmBk.dpuf
Overall Rating

0

5 Star
(0)
4 Star
(0)
3 Star
(0)
2 Star
(0)
1 Star
(0)
APA

UZOIGWE, E (2018). Construction Of A Simple Paint Mixer. Afribary.com: Retrieved February 25, 2018, from http://dubz-by-dan.co.uk/works/construction-of-a-simple-paint-mixer-6751

MLA 8th

EMMANUEL, UZOIGWE. "Construction Of A Simple Paint Mixer" Afribary.com. Afribary.com, 29 Jan. 2018, http://dubz-by-dan.co.uk/works/construction-of-a-simple-paint-mixer-6751 . Accessed 25 Feb. 2018.

MLA7

EMMANUEL, UZOIGWE. "Construction Of A Simple Paint Mixer". Afribary.com, Afribary.com, 29 Jan. 2018. Web. 25 Feb. 2018. < http://dubz-by-dan.co.uk/works/construction-of-a-simple-paint-mixer-6751 >.

Chicago

EMMANUEL, UZOIGWE. "Construction Of A Simple Paint Mixer" Afribary.com (2018). Accessed February 25, 2018. http://dubz-by-dan.co.uk/works/construction-of-a-simple-paint-mixer-6751